hm126-openhm126-top-lefthm126-top-righthm126-lifting-hookshm126-right
hm126-valvehm126-lefthm126-motorhm126-manual-openHM126-360-Side
HM126-360-Front

HM126 이동식제재기

12,000,000 ₩

HM126 Portable Sawmill

SKU: HM126 Categories: , , Tags: ,

HM126 이동식제재기


HM126 이동식제재기은 디자인.설계 및 아이디어 기타등 모든 부분을 캐나다 우드랜드에서 만들어 졌습니다 또한 이미 북미와 유럽에서

는 경쟁사의 제품 대비 높은 품질과 낮은 가격으로 최고의 히트 친 상품으로 알려져 있습니다 더 말이 필요없이 기계적 바탕 레벨 수준은 최상급인 HM126 이동식제재기는 구매자에게 높은 퀄리티 를 함께 제공 됩니다 또한 여타의 경쟁사 보다 더욱 낮은 가격으로 더 많은 기계적인 요소을 제공 함으로써 많은 고객으로부터 선택을 받고 있습니다 엔진은 9.5 HP의 미국제품 쾰러사의 기솔린 엔진을 탑재 하였습니다

또한 모든 주요 철 부분은 강력한 특수 도장 처리되었고 또한 아연 철과 도금으로 마무리 하였기에 오래동안 부식없이 사용 할 수 있습니다 HM126 이동식 제재기은 자연적 요소로 부터 쉽게 변하고 탈색 될 수 있는 부분을 최소하 하였습니다

HM126 이동식 제재기 해드는 위 아래로 쉽게 이동 하여 원하는 치수를 쉽고 빠르게 판독후 곧 바로 킬 수 있도록 설계 되였습니다


The Facts

  • 9.5 H.P Kohler gas engine 가솔린 엔진
  • Centrifugal clutch blade engagement system 원심력 클러치 방식
  • 26″ log diameter capability 직경 26”
  • 19″ Square Cants
  • 10 ft log lengths (additional tracks available) 10ft 길이(길이 늘리수있음)
  • 19″ cast iron band wheels  19”인치 주물 휠
  • 6.5L aluminum lubrication tank to keep the blade lubricated while cutting 6.5리터 알류미늄 뤼베맄 윤활시스템
  • Hand crank system to raise and lower the head with very little effort 핸드 클랜크 정밀한 업다운시스템
  • Cam locking handles to secure the head vertically while making cuts
  • Powder coated and galvanized steel finishes 해드 잠금장치 시스템
  • “Gas and Go” easy handle throttle design연료 공급 핸들 차단 창치

Cutting

HM126 제재기의 기본 능력은 직경 26”.가공 트렉 섹션 시스템 길이 3M (길이 무한정 추가할수있음) 작업구 19-인치와 두께은 1/16인치


Power

Our mills are powered by a 9.5 H.P 4-cycle Kohler gas engine. It features a slant cylinder design, with a cast iron cylinder bore and overhead valve for easy access. The Quad-Clean 4-stage air filtration system ensures only clean air enters the engine for maximum power and life of the engine. In addition, this engine is backed by a 3 year commercial warranty.

Attached to the engine is an industrial centrifugal clutch system which offers “gas and go” efficiency and ease.

Offical Kohler CH395 Engine Site



Track System

The head of our machine rolls along rigid 2.5″ x 4″ “L” channel which is cross supported with heavy duty 3″ x 6″ rectangle channels. These cross supports ensure the weight of the log is dispersed over a large bearing surface to avoid marking the log with indentation. These heavy duty cross supports also provide additional rigidity to the track system. The track also features a simple adjustable log support to securely hold the log while milling. The track itself consists of two 6 ft sections allowing for 10 ft log lengths. Additional 6 ft tracks may be attached to accommodate logs of any length.


Blades

The HM126 utilizes standard 1.25″ x 144″ x .042″ Lenox Woodmaster C Sharp hardened tipped blades which are available through Woodland Mills. Blade kerf is kept to a minimum at just .080″ to maximize the most amount of lumber per log.


Warranty

The sawmill is covered with a 2 year warranty against manufacturer’s defect and excludes wearing parts (belts, blades & bearings). The Kohler engine is covered by a 3 year commercial warranty which is honoured through any Kohler small engine dealer.

선적 안내

* Most orders can be shipped to your home or business address with curbside delivery. Tailgate service is also offered to most regions. To confirm that your area is eligible for curbside/tailgate delivery, feel free to call us at 1-855-476-6455. Stocked items are typically shipped out of our warehouse within 2-3 business days and shipping times range from 3-10 days. Once your order is shipped, a tracking number will be provided for a more accurate delivery day.

Approximate Delivery Times

Some residential deliveries may require additional days of service. Please call for shipping quote and delivery times for territories and remote locations.

상품설명

구매자 설명

각 모델 가격

악세사리

제재기 트레일러

Build your own trailer. Click below for drawings and bill of materials.

Instructions: Click and Hold Left Mouse Button While Dragging Your Mouse Left or Right to Spin the Product